

RAM Mounts Locking Thin-Dock + Data for the Zebra ET401 10" (RAM-HOL-ZE47PDLU) charges an ET401, ET40 or ET45 10" tablet through its pogo pins and adds one USB-A port for a keyboard, mouse or printer. What sets it apart from the non-locking Thin-Dock + Data is the key lock, so the tablet can stay docked in a van, a forklift cab or a delivery truck that is left unattended. At 62.2 mm (2.45") deep, it suits cabs where a Tough-Dock would take too much room.
📦 What's in the box – RAM-HOL-ZE47PDLU
- Locking Thin-Dock + Data for Zebra ET401 10" – pogo-pin charging, 5.5 mm DC input with 1 m cable, USB-A peripheral cable 225 mm
- Keys – 2 keys for the dock lock
- Fit inserts – for a tablet in a rugged boot, in a RAM Skin or bare
- Mounting hardware – 4× #8-32 x 5/8" machine screws with 4 nyloc nuts, 4× #10-24 x 5/8" machine screws with 4 nyloc nuts
- Cable clamps – 2, for routing the power and USB leads
💡 Feed it from the vehicle with the 10–32 V hardwire charger with 5.5 mm plug or, for 20–60 V systems such as forklifts, the V9U version. For the mount itself, a C-size VESA 75 plate or C-size round plate with a C-size double socket arm completes the setup.
Key Features
- Locks the tablet in – a key lock holds the ET401 in the dock between shifts; 2 keys come with it
- Slim enough for tight cabs – 62.2 mm (2.45") overall depth, stiffened by a metal reinforcement plate
- Charging and one peripheral – pogo pins charge the tablet while a USB 2.0 Type-A lead (225 mm, 500 mA, 12 Mbps) takes a mouse, keyboard or printer
- One dock for three case set-ups – the supplied inserts adapt it to a tablet in a rugged boot, in a RAM Skin or with no case
- Room for a second device – a built-in 2-hole plate accepts a RAM diamond base for a phone or handheld scanner, and the scan window on the side stays clear
- Standard mounting patterns – AMPS 4-hole 30 × 38 mm for RAM C- and D-size bases plus VESA 75 × 75 mm
Compatibility
- Zebra ET401, ET40 and ET45 10" tablets – with rugged boot, with RAM Skin or bare, using the supplied inserts
- Not for tablets fitted with a Zebra Expansion Back or PowerPack battery
- RAM C- and D-size bases with the AMPS 4-hole pattern; VESA 75 × 75 mm plates
- RAM 2-hole diamond bases on the built-in accessory plate; RAM Vent-Temp and RAM NFC Extender attachment points
Technical Specifications
| Part Number | RAM-HOL-ZE47PDLU |
|---|---|
| Compatible Devices | Zebra ET401, ET40, ET45 10" (rugged boot, RAM Skin or bare) |
| Locking | Key lock, 2 keys |
| Power | 5.5 mm DC input, 1 m cable; 12 V @ 2 A, 24 W; charging via pogo pins |
| Data Ports | 1× USB 2.0 Type-A, 225 mm cable, 500 mA, 12 Mbps |
| Depth | 62.2 mm (2.45") |
| Hole Pattern | AMPS 4-hole 30 × 38 mm (1.181" × 1.496"); VESA 75 × 75 mm |
| Materials | High-strength composite, metal reinforcement plate |
| Certifications | RoHS, WEEE, CE, FCC, IC, RCM |
| Weight | 0.84 kg (1.84 lb) |
| In the Box | Locking Thin-Dock, 2 keys, inserts, mounting hardware, 2 cable clamps |
Deploying ET401 tablets across delivery vans or a warehouse forklift fleet? As an Official RAM Mounts Reseller we help pick the dock, charger and arm per vehicle and quote the whole rollout.
Questions about RAM-HOL-ZE47PDLU
What is the difference between RAM-HOL-ZE47PDLU and RAM-HOL-ZE47PDU?
The electronics, depth and USB-A port are the same. RAM-HOL-ZE47PDLU adds a key lock with 2 keys; RAM-HOL-ZE47PDU holds the tablet without a lock.
Can I keep the Zebra Expansion Back or PowerPack on the tablet?
No. The Thin-Dock is built shallow, and there is no room for those add-ons. Remove them before docking.
Which charger do I need?
The dock takes a 5.5 mm DC plug. Use RAM's GDS hardwire charger for 10–32 V vehicles (RAM-GDS-CHARGE-V10U) or the 20–60 V version (RAM-GDS-CHARGE-V9U) for forklifts and other high-voltage systems.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.