

What's in the box – RAM-B-342-366U
Ball Adapter with 1/4"-20 Threaded Stud for Action Cameras, B-Size
For a camera view straight down the middle of the bike, RAM Mounts Motorcycle Fork Stem Camera Mount (RAM-B-342-366U) uses the hollow fork stem as its anchor. The base expands inside stem holes of 12–38 mm, a medium 76 mm (3") arm sets the angle, and the top ball ends in a 1/4"-20 stud that screws into a camera's tripod thread.
Switching between camera and phone? Keep the base and arm and swap the stud for an X-Grip phone holder. Extra fork stem bases let one camera move between bikes.
Key Features
- Camera thread on top – the RAP-B-366U adapter carries a 1/4"-20 threaded stud on a B-size ball
- Mounts in the fork stem – a rubber expansion plug locks the base inside stem holes of 12–38 mm (0.5"–1.49") – no bar clamp
- Room to aim – the medium arm is 76 mm (3") socket to socket, enough reach to lift the camera above the stem and set its angle
- Two ball joints – tilt and rotate at both ends of the arm, then fix the view with one knob
- Complete and light – base, arm and camera adapter together weigh 0.27 kg (0.59 lb)
Compatibility
- Cameras with a female 1/4"-20 thread
- Motorcycles with a fork stem hole of 12–38 mm (0.5"–1.49") – RAM lists around 90 models, including Yamaha R1 and MT-10, Suzuki GSX-R and Hayabusa, Kawasaki Ninja H2, Ducati Panigale, BMW S1000RR and Aprilia RSV4
Technical Specifications
| Part Number | RAM-B-342-366U |
|---|---|
| Kit Contents | RAM-B-342U fork stem base, RAM-B-201U medium arm, RAP-B-366U 1/4"-20 camera ball adapter |
| Stem Hole Range | 12–38 mm (0.5"–1.49") |
| Thread | 1/4"-20 male stud |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | Marine-grade aluminium, high-strength composite |
| Mounting Type | Fork stem hole, rubber expansion plug |
| Weight | 0.27 kg (0.59 lb) |
| In the Box | Fork stem base, medium arm, camera ball adapter, expansion plug, M5 × 60 mm screw, washer sets, brass nyloc nut |
Need the same camera position on several motorcycles? As an Official RAM Mounts Reseller we can supply extra fork stem bases, so the arm and camera move between bikes in a minute.
Questions about RAM-B-342-366U
Which cameras fit RAM-B-342-366U?
Any camera with a standard female 1/4"-20 thread, within the 0.9 kg (2 lb) standard load rating.
Can I turn it into a phone mount later?
Yes. Leave the base on the bike, loosen the arm knob, lift out the camera adapter and fit a holder with a B-size ball, such as the X-Grip RAM-HOL-UN7BU.
How is it fitted to the bike?
The rubber plug of the RAM-B-342U base goes into the fork stem hole and expands as the M5 screw is tightened. The hole must measure 12–38 mm.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

