

What's in the box – RAM-HOL-TAB8U
RAM Mounts Tab-Tite Holder for Apple iPad Pro 9.7 with Case (RAM-HOL-TAB8U) is the cradle inside RAM's Tab-Tite kits for cased 9.7" iPads. Its deep cups take a tablet up to 28.4 mm thick, so the iPad keeps its protective case on. Sold on its own, it lets you build a mount around RAM arms and bases you already use, or replace the holder of an existing kit.
No mount yet? The drill-down kit and the flat surface mount include this holder. To build your own, add a B-size round plate and a B-size arm.
Key Features
- Room for a case – accepts devices 3.3–28.4 mm (0.13"–1.12") deep and 162–211 mm (6.38"–8.31") wide
- Spring-loaded height range – 229–292 mm (9"–11.5") between the end cups
- The holder in RAM's kits – the same cradle comes in drill-down, suction cup, yoke clamp, cup holder and handlebar mounts
- B- or C-size bases – AMPS 4-hole 30 × 38 mm (1.181" × 1.496") back for RAM B- and C-size round ball bases
- Changeable cups – fit a different Tab-Tite cup set to the backplate when the iPad is replaced; 0.30 kg (0.65 lb) complete
Cockpit, dash and windscreen
RAM pairs this holder with a yoke clamp for aircraft, a Twist-Lock suction cup for windscreens and a cup holder mount for cars and trucks. Off-road or in an open cockpit, RAM advises a tether to keep the iPad attached. In aircraft, follow the aircraft's and aviation authority's rules on where equipment may be mounted.
Compatibility
- Apple iPad Pro 9.7 (1st generation) in a case
- Other tablets 229–292 mm tall, 162–211 mm wide and up to 28.4 mm deep, measured with their case
- RAM B- and C-size round ball bases with the AMPS 4-hole pattern
Technical Specifications
| Part Number | RAM-HOL-TAB8U |
|---|---|
| Kit Contents | RAM-HOL-ACU Tab-Tite backplate with hardware, RAM-HOL-TAB8-CUPSU end cups for iPad Pro 9.7 with case |
| Compatible Devices | Apple iPad Pro 9.7 (1st gen.) with case |
| Device Size | Height 229–292 mm (9"–11.5"); width 162–211 mm (6.38"–8.31"); depth 3.3–28.4 mm (0.13"–1.12") |
| Hole Pattern | AMPS 4-hole, 30 × 38 mm (1.181" × 1.496") |
| Materials | High-strength composite |
| Weight | 0.30 kg (0.65 lb) |
| In the Box | Tab-Tite backplate, pair of end cups for iPad Pro 9.7 with case, AMPS assembly hardware |
Deciding between a dash, windscreen or cockpit installation for a group of iPads? As an Official RAM Mounts Reseller we quote the holder alone or any of the complete Tab-Tite kits built around it.
Complete RAM mounts with this part (11)
Every complete mount below includes this part.
Tab-Tite Drill-Down Mount for 10" Tablets with Heavy-Duty Cases, B-Size, Medium Arm
431,00 zł +VATIn stock
Tab-Tite Suction Cup Mount for 10" Tablets in Heavy-Duty Cases, B-Size
504,00 zł +VATIn stock
Tab-Tite Dual Suction Cup Mount for iPad Pro 9.7" with Case, Extension Knob, B-Size
1.015,00 zł +VATIn stock
Tab-Tite Pod I No-Drill Vehicle Mount for iPad Pro 9.7" with Case, B-Size
737,00 zł +VATIn stock
Tab-Tite Drill-Down Mount for iPad Pro 9.7 with Case, C-Size
584,00 zł +VATIn stock
Tab-Tite Strap Hose Clamp Mount for Tablets with Case, B-Size, Medium Arm
521,00 zł +VATOut of stock
Tab-Tite Yoke Clamp Mount for 9–10" Tablets with Heavy-Duty Case, B-Size, Medium Arm
561,00 zł +VATOut of stock
Tab-Tite U-Bolt Rail Mount for 10" Tablets in Heavy-Duty Cases, B-Size, Medium Arm
485,00 zł +VATOut of stock
Tab-Tite Dual Suction Mount for iPad Pro 9.7" with Case, B-Size, Medium Arm
665,00 zł +VATOut of stock
Tab-Tite Cup Holder Mount for 10" Tablets in Heavy-Duty Cases, B-Size, Medium Arm
576,00 zł +VATOut of stock
Tab-Tite Cup Holder Mount for 10" Tablets in Heavy-Duty Cases, B-Size, Long Arm
694,00 zł +VATOut of stock
Questions about RAM-HOL-TAB8U
Which iPad is this holder made for?
RAM lists the iPad Pro 9.7 (1st generation) in a case. Other tablets fit if, with their case, they are 229–292 mm tall, 162–211 mm wide and no deeper than 28.4 mm.
Which RAM kits use RAM-HOL-TAB8U?
Among others the drill-down mount RAM-B-138-TAB8U, the suction cup mount RAM-B-166-TAB8U, the yoke clamp mount RAM-B-121-TAB8U and the cup holder mounts RAP-299-3-B-102-TAB8U and RAP-299-3-C-TAB8U.
Do I need a tether?
RAM advises one for off-road driving and open cockpits. A tether is not part of this holder.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

