How-to

Locking tablet mount for vehicles: RAM Pin-Lock, docks, Safe-Case

Lock the device in its dock, lock the arm with Pin-Lock, or both: how RAM anti-theft options work, which to choose for unattended vehicles and shift work, and how to handle the keys.

30 min Difficulty: Medium Updated: By SCANSHOP team
In this guide

    A locking tablet mount keeps a vehicle tablet, handheld or laptop in place when the crew steps away or the next shift takes over. RAM Mounts locks work at two points: the device in its dock, and the knob on the arm. This guide helps police, rescue, border guard and defence fleets choose and manage them, as part of our RAM Mounts guide for defence and security vehicles.

    RAM Mounts logo

    No lock, dock lock or arm lock: three set-ups

    RAM calls its key and combination locks “theft deterrence” and says the Pin-Lock adds “tamper resistance”. A lock makes a quick grab or tampering harder. It does not turn a vehicle into a safe.

    123
    1 Standard holder: the device lifts out · 2 Locked dock: the device stays in, but the arm knob still unscrews · 3 Locked dock plus a Pin-Lock on the arm
    Set-up What is locked What it makes harder RAM options
    1. No lock Nothing; the crew takes the device along Nothing X-Grip, Tab-Tite, non-locking docks
    2. Device locked The device in its dock, holder or case Pulling the device out Tab-Lock, locking docks, Safe-Case
    3. Device and arm locked Device and arm knob Removing dock and device together Pin-Lock, key-lock knob

    Set-up 2 alone leaves the arm knob free to unscrew. For unattended vehicles, use set-up 3.

    Which option to choose

    Vehicle left unattended

    Take the device along when you can. Otherwise lock it in a key-locking dock or a Safe-Case, fit a Pin-Lock and screw or bolt the base down. RAM describes its Tough-Claw clamp as offering “tool-less installation and removal”, and that works for anyone. Never leave keys in the vehicle.

    Shared devices across shifts

    Keep one labelled key set with the vehicle keys, or use a combination-lock dock so there are no keys to hand over. With a Pin-Lock, crews can still adjust the angle within limits.

    Devices removed at the end of the shift

    Here fast undocking matters more than a dock lock. Still fit a Pin-Lock: a powered dock left in the vehicle is worth protecting.

    For the right dock per tablet model, see our rugged tablet vehicle mount guide. SCANSHOP is an official RAM Mounts reseller: send us the device model, and we will check which locking version RAM makes.

    Lock the device in a locking tablet mount or dock

    The main kinds of RAM locking holder:

    • Tab-Lock – a universal cradle for 10–11 in rugged tablets with a “locking mechanism for theft deterrence” and two keys. Check RAM’s height, width and depth ranges against your tablet with its case on.
    • Key-locking form-fit docks – shaped for one device, often with power and USB. The Locking Tough-Dock for Zebra ET4x 8" has “a key lock for theft deterrence” and two keys; it does not take IntelliSkin.
    • GDS key-locking docks – for devices in an IntelliSkin sleeve. The Locking GDS Tough-Dock for Tab Active5 and Active3 has two keys and needs an IntelliSkin Next Gen sleeve, not included (Tab Active5 or Active3 version).
    • Safe-Case – a key-locking, two-piece steel enclosure that, RAM says, “protects against theft, tampering, and tough environmental conditions”. It mounts by VESA, AMPS or flush, and RAM’s instructions add optional side screws “for added security”.

    Recommended locking RAM docks and holders

    RAM Mounts Tab-Lock locking holder for 10-11 inch rugged tablets such as Panasonic FZ-G1 – main product photo
    RAM MOUNTRAM Mounts Tab-Lock Locking Holder for 10–11" Rugged TabletsPart no. RAM-HOL-TABL19U
    564,00 zł+VATIn stock
    RAM Mounts Locking GDS Tough-Dock for Samsung Tab Active5 and 3 – product photo
    RAM MOUNTRAM Mounts Locking GDS Tough-Dock for Samsung Galaxy Tab Active5 & Active3Part no. RAM-GDS-DOCKL-SAM62CPU
    1.379,00 zł+VATAvailable on request
    RAM Mounts key-locking steel Safe-Case for Samsung Galaxy Tab Active5 and 3 – product photo

    Buying for a fleet or a tender? Ask us for a quote.

    Get a quote

    More options, including a combination-lock dock:

    Device Locking option Lock
    Galaxy Tab Active5 / Active3 Locking GDS Tough-Dock or Safe-Case Key
    Zebra ET40 / ET45 8" (Rugged Frame), ET401 (RAM Skin) Locking Tough-Dock Key
    Zebra ET5x 8.3" / 8.4" GDS combination-lock dock Combination
    Zebra ET60 / ET65 Key-locking dock, heated pins Key
    Getac ZX70 Key-locking form-fit holder Key
    Zebra TC73 / TC78 in IntelliSkin GDS key-locking dock, heated pins Key
    Most laptops 10–17 in (diagonal) Tough-Tray III with cam lock Key

    Lock the arm with RAM Pin-Lock or a key-lock knob

    The knob on a double socket arm clamps both balls. RAM’s Pin-Lock replaces it with a security nut or knob that is turned with a matching key knob.

    Arm size RAM lock What RAM says
    D (57.2 mm ball) and E (85.9 mm) Pin-Lock Security Nut RAP-S-NUT5-4U Replaces all knobs on D and E arms and mounts; one key
    C (38.1 mm ball) Pin-Lock Security Knob RAP-S-KNOB5U Replaces all knobs on C arms and mounts; randomised patterns; one key
    C (38.1 mm ball) Key Lock Knob RAM-KNOB5LU or arm RAM-201LU Brass-insert key-lock knob; two keys

    RAM also lists a key-lock knob for B size arms; ask us. Unsure of the size? See our RAM ball sizes guide.

    RAM’s steps for the D and E security nut:

    1. Tighten the mount’s existing knob fully.
    2. Place the security nut on the key knob with the Pin-Lock patterns aligned.
    3. Insert it into the knob and tighten the key knob by hand.
    4. Tighten fully, using a thin screwdriver through the key knob as a lever.
    5. Loosen by two full turns to keep limited adjustment.
    Note

    RAM states that the mount then “can be loosened and adjusted, but cannot be removed or disassembled without the use of the key knob”. For the C size knobs, follow RAM’s sheet for that part.

    1234
    1 Base and fasteners (not locked) · 2 Arm knob with a Pin-Lock · 3 Lock on the dock or holder · 4 Key knob and keys, kept off the vehicle

    RAM Pin-Lock security nuts and knobs

    RAM Mounts Pin-Lock security knob for C-size socket arms – product photo
    RAM MOUNTRAM Mounts Pin-Lock Security Knob for C-Size Socket ArmsPart no. RAP-S-KNOB5U
    81,00 zł+VATAvailable on request

    Buying for a fleet or a tender? Ask us for a quote.

    Get a quote

    Install it safely in the vehicle

    Important

    RAM’s instructions say: “Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle operation.” Follow the vehicle maker’s and RAM’s instructions.

    • Screw or bolt the base to a solid surface where the vehicle maker allows it.
    • Have a qualified installer wire and fuse powered docks and chargers, following RAM’s and the vehicle maker’s instructions.
    • Test every lock, and the spare key, before the vehicle goes into service.

    Set up key and code management

    • Count the keys on delivery. RAM supplies one key with each Pin-Lock part and two with the Tab-Lock, the key-lock knob and the locking Tough-Docks.
    • Label and record. Mark each key set with the vehicle or asset number and list each lock’s RAM part number.
    • Keep spares at the depot, never in the vehicle.
    • Pin-Lock. Replacement keys “must match same Pin-Lock pattern” (RAM), so note the pin count.
    • C size Pin-Lock in a fleet. The standard C knob has randomised patterns (RAM: ordering several “may result in mixed key combinations”); fixed-pattern versions exist, so ask us.
    • Brass key-lock knob. Keep the second of its two keys as the depot spare.
    • Dock keys. RAM does not say whether keys differ between units; ask us before planning one key for a fleet.
    • Combination locks. Replace the factory preset with your own code, record it and change it when staff leave.
    Tip

    Add the locks to the shift handover check.

    What RAM’s locks do not claim

    • No security rating. None of the RAM pages we checked gives a security grade or security certification.
    • No base protection. Locks cover the knob and the device, not the base.
    • No data protection. Use a screen lock and device management; see our device management guide.

    Frequently asked questions

    What is a RAM Pin-Lock?

    A security nut or knob that replaces the standard knob on a RAM socket arm. RAM says the mount can still be adjusted, but not removed without the matching key knob.

    Which RAM arms does the Pin-Lock security nut fit?

    RAP-S-NUT5-4U fits D and E size arms and mounts. For C size arms, RAM makes the RAP-S-KNOB5U security knob.

    What if I lose the Pin-Lock key?

    RAM sells replacement keys that must match your knob’s Pin-Lock pattern. For the 4-pin D and E nut it is RAP-S-KEYN5-4U.

    Is a locking tablet mount theft-proof?

    No. RAM describes its locks as theft deterrence and tamper resistance. Take devices along when a vehicle stands unattended.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the RAM Mounts Pin-Lock 4-Pin Security Nut for D- and E-Size Socket Arms (RAP-S-NUT5-4U).

    Products used in this guide

    Related guides

    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    RAM Mounts Pin-Lock 4-Pin Security Nut for D- and E-Size Socket Arms (RAP-S-NUT5-4U)52,00 zł+VAT View product